Azbil VDC User Manual

Azbil Corporation Operation using the data setting device
Model MTG11A/18A, MTG11B/18B, MTG14C 6-35
Displaying software version: SW VER key
Procedure
Use the following procedure to confirm the software version of the SFC and the
converter connected to the SFC used.
Step Key Procedure SFC screen
1 Make sure that the SFC is set to
“READY”.
If it is not, press the key to set it
to “READY”.
2
Press the key.
3
Press the (SW VER) key.
Result:
- The software version is displayed.
4 After confirming the software version,
press the key to return to the
screen in step 1.
CLR
( No )
CLR
( No )
SFCM00006009D
SHIFT
SHIFT
SFCM00006002D
X
3
SW VER
X
3
SW VER
SFCM00006066D
CLR
( No )
CLR
( No )
CM2-MTG300-2001.book 35 ページ ２０１５年９月２９日 火曜日 午前１０時１４分

Azbil VDC Specifications

General

Brand	Azbil
Model	VDC
Category	Measuring Instruments
Language	English