Azbil VDC User Manual

Azbil Corporation Operation using the data setting device
Model MTG11A/18A, MTG11B/18B, MTG14C 5-75
5-7-9 : Displaying ROM version and date
Displaying ROM version
The ROM version and date of the converter can be displayed on the display screen.
Display the ROM version and data in accordance with the following procedure:
Step Procedure Screen
1 Enter MAINTENANCE MODE in accordance
with the entry into MAINTENANCE MODE (see
section 5-5-9 on page 5-36). Using the  or  key,
display the screen at right.
2 Press the  key twice to display the screen at
right.
3 Press the  key to move the cursor to the OFF
position. Then press the - key to switch the
display from OFF to ON.
4 After the entry into CRITICAL MODE, the
screen at right appears. On the screen, the ROM
version and date can be checked.
20.0 %
> OUTPUT CHECK
MODE OFF
20.0 %
> CRITICAL
MODE OFF
20.0 %
> CRITICAL
MODE ON
20.0 %
> ROM VER.
DATE YY-MM-DD
CM2-MTG300-2001.book 75 ページ ２０１５年９月２９日 火曜日 午前１０時１４分

Azbil VDC Specifications

General

Brand	Azbil
Model	VDC
Category	Measuring Instruments
Language	English