Azbil Corporation Operation using the data setting device
Model MTG11A/18A, MTG11B/18B, MTG14C 6-59
5
or
Press the key or key to
show this screen. Present burnout
direction appears.
6
Press the key and select the
output status to be set. You can
select HOLD or STOP.
7
Press the key.
Fail-safe direction, which is set, is
confirmed.
8
or
Press the key or key to
show this screen.
9
Press the key. The screen
shown to the right appears and the
changed setting is written into the
database of the converter.
10 Setting is completed. Press the
key, and return to the screen
as in step 1.
Step
Key Procedure SFC screen
CM2-MTG300-2001.book 59 ページ ２０１５年９月２９日 火曜日 午前１０時１４分
To Next Page
Loading...
Need help?
General
