Azbil VDC User Manual

Azbil Corporation Operation using the data setting device
Model MTG11A/18A, MTG11B/18B, MTG14C 6-65
7
Press the key.
The changed setting is saved to the
SFC.
8
or
Press the key or key to
show this screen.
9
Press the key.
The screen as shown on the right will
appear. # mark will be displayed to the
bottom right, and contact outputs
according to the output status.
10
After confirming, press the key.
The screen as shown on the right
appears.
Press the key.
The screen exists the contact output
function
11
Press the key, and return to the
screen as in step 1.
Step Key Procedure SFC screen
ENTER
( Yes )
NON-VOL
ENTER
( Yes )
NON-VOL
SFCM00006113D
H
NEXT
L
PREV
H
NEXT
L
PREV
SFCM00006114D
ENTER
( Yes )
NON-VOL
ENTER
( Yes )
NON-VOL
SFCM00006115D
CLR
( No )
CLR
( No )
ENTER
( Yes )
NON-VOL
SFCM00006163D
CLR
( No )
CLR
( No )
SFCM00006009D
CM2-MTG300-2001.book 65 ページ ２０１５年９月２９日 火曜日 午前１０時１４分

Azbil VDC Specifications

General

Brand	Azbil
Model	VDC
Category	Measuring Instruments
Language	English