Bartec MAK TIGER 3003 Service Manual

Safety precautions
4
Measuring System MAK TIGER 3003 Service manual, SA 131128, 10.03.2020
2.5 Maintenance schedule
First of all, pay attention to the maintenance intervals prescribed by the body
manufacturer or measuring system installer for filters, hoses and liquids.
Daily:
 CIP
Weekly:
 Check service units for condensate residues and the contamination indi-
cator for signs of discolouration
 Check pressure setting on service units
 Change sampler hoses (At least every 10 days)
 Check intake strainer
Monthly:
 Check hydraulic oil cooler for excessive levels of impurity
 Carry out vacuum test, if necessary, to check that measuring system is not
leaking
Biannually:
 Check hydraulic oil level and top up if necessary
 Check full alarm sensors
 Carry out sampling process
Annually:
 Check all screws to make sure that none are loose
 Calibration
 Check hydraulic oil and oil filter for impurities and change
 Change milk hoses

Bartec MAK TIGER 3003 Specifications

General

Brand	Bartec
Model	MAK TIGER 3003
Category	Measuring Instruments
Language	English