Bartec MAK TIGER 3003 - 23 Printer Type 6881-30; Technical Data

Printer type 6881-30
135
Measuring System MAK TIGER 3003 Service manual, SA 131128, 10.03.2020
23 Printer type 6881-30
Order no.: 235934
Attention:
The printer and the printer holder must be protected from moisture!
23.1 Technical data
Device-specific data
Printing format
Alphanumerical character set with 96 ASCII characters (font
5 x 7 / 7 x7)
32 international characters and 128 x 3 graphical characters
(font 6 x 7 / 10 x 7)
4 letter sizes:
Standard, font 5 x 7 (35 characters per line)
Normal, font 7 x 7 (42 characters per line)
Wide, font 5 x 7 (17 characters per line)
Wide, font 7 x 7 (21 characters per line)
Line feed: 4.2 mm
Printing procedure
Needle printer 7 x 7
Unidirectional printing
Printing speed
1.9 ... 2.3 lines per second
Printing paper
Standard, carbon and self-copy paper
Total thickness 0.09 ... 0.35 mm
Paper width at least 80 mm
Paper length at least 80 mm
Printing width max. 60 mm
Max. 4 copies with self-copy paper (25° C)
Colour ribbon
Colour ribbon cassette black
Life expectancy approx. 1.5 x 10
6
characters
Data interface type 6961-100
Serial interface (RS 232)
Cable length max. 10 m