Bartec MAK TIGER 3003 - 12.4 Drain the measuring system

Measuring system MAK E-TIGER 3003
51
Measuring System MAK TIGER 3003 Service manual, SA 131128, 10.03.2020
6 Measuring system MAK E-
TIGER 3003
6.1 Introduction
The MAK E-TIGER® measuring system for dairies is designed for stationary
use during milk collection.
The measuring system can be operated entirely from an electrical source via
a 16A CEE plug socket.
It is the first self-priming measuring system to operate without gas separators.
The latest sensor technology is used to measure the air portion which una-
voidably occurs during intake, and offsets it accordingly.
This significantly increases the efficiency of the intake because the gas sepa-
rator with its limiting effect is not needed and thus the pumping output is in-
creased.
This new technology can only be fully exploited, however, if the design and
build of the tanker meet certain basic specifications, meaning the design en-
gineer is crucial to the effective use of the system.
Note:
Several patents have been applied for in relation to the measuring process.