EasyManua.ls Logo

Bartec MAK TIGER 3003 - 26 ULTRASAMPLER Sample Collection System; Description

Bartec MAK TIGER 3003
216 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ULTRASAMPLER® sample collection system
147
Measuring System MAK TIGER 3003 Service manual, SA 131128, 10.03.2020
26 ULTRASAMPLER® sample
collection system
26.1 Description
The ULTRASAMPLER® system is an automatic sampling system for milk col-
lection vehicles in conjunction with the MAK 3003 milk intake and monitoring
system.
The sample is taken "on line" during the milk intake and is always proportional
to the volume flow rate.
If a dual pump system is used, it is possible to take individual samples and
samples from the whole tank (GTP) at the same time.
There is a choice of manual to fully automatic infeed systems for the empty
sample bottles.
There are bar code and transponder (TAG) systems for the sample bottle
identification.
The following units belong to the ULTRASAMPLER sample collection system
range:
Sampler controller, type 6771-31
Sampler pump, type 6871-x
Flow level meter, type 6826
Bottle drive, type 6774-10/6774-12
Manual sample bottle feed, type 6871-3-30
Semi-automatic sample bottle feed, type 6871-3-50
Bar code reader, type 6727-40
Bar code reading unit, type 6723-10, B series
The system configuration depends on the regulations in force in the relevant
country and on the individual customer specifications.
It is advisable to use the flow level meter (FLM) to increase the accuracy
and representativeness of the sample, especially for milk quantities < 300
litres.

Table of Contents

Other manuals for Bartec MAK TIGER 3003

Related product manuals