Bartec MAK TIGER 3003 - 3 Basics; 3.1 Compact Controller

About this manual
1
Measuring System MAK TIGER 3003 Service manual, SA 131128, 10.03.2020
1 About this manual
The illustrations in this manual are intended to illustrate the information and
descriptions. They cannot always be transferred unchanged and may differ
slightly from the actual design of the device.
BARTEC GmbH reserves the right to make technical changes at any time.
BARTEC GmbH is under no circumstances responsible or liable for any indi-
rect or consequential damages resulting from the use, operation or application
of this user manual.
Please read the operating instructions carefully before using the prod-
uct.
Signs and symbols
The following characters and symbols are used in this manual to highlight
passages that need special attention.
Notes
This arrow indicates special features to be observed during operation.
Warning
This symbol draws your attention to passages that, if not followed or fol-
lowed inaccurately, may result in damage to or destruction of parts of the
system or loss of data.
Danger!
This symbol marks passages that, if not followed, endanger the health or
life of humans.
Special notes that appear within the text are marked with a frame.