Motive for BlackTrax
Table of contents:
1 Initial Setup :
1.1 Introduction :
1.2 Layout Presets in Motive :
1.3 BTSensor Differences in Motive :
1.4 BTSensor Presets :
1.5 Checking the Connectivity of BTSensors :
1.6 Using Motive to Aim BTSensors :
1.7 BTSensor Aim Assist Feature :
1.8 Motive Project File :
2 BTSensor Calibration :
2.1 BTSensor Calibration Settings :
2.2 Masking Infrared Interference for Calibration :
2.3 Calibrating a BTSensor :
3 Tracking Mode :
3.1 Tracking Mode Settings :
3.2 Customizing Tracking Bounds :
3.3 Optional View Settings :
4 Recording in Motive :
4.1 Introduction :
4.2 Modes in Motive :
4.3 Working with Recordings :
4.3.1 Calibrating BTSensors from a Recording :
To Next Page
Loading...