Modes in Motive
In Motive, there are three modes of operation: LIVE, REC (Record) and EDIT. Modes act as a reminder of
where information shown in the Perspective View and Camera View window is originating from.
Motive 2
The Status Bar is always docked at the bottom of Motive, and it provides both recording and navigation
controls over Motive's primary operating modes.
LIVE/REC mode
EDIT mode
LIVE: Information shown in LIVE mode is happening in real-time. Everything shown is what
BTSensors see at the present time. When in LIVE mode, a green image is displayed in Perspective
View.
Note: LIVE mode is the default mode of Motive.
REC: Information shown in REC mode is happening in real-time and being recorded to file for later
use. Everything shown is what BTSensors see at the present time. When in REC mode, a red image
is displayed in Perspective View and a red border appears around the Perspective View and Camera
View windows.
EDIT: Information previously recorded is being played back. Everything shown is what BTSensors
saw during a recording in REC mode. When in EDIT mode, a blue image is displayed in Perspective
View.
Attention: When Motive is in EDIT mode, no live data is sent through the BTSystem. Be sure that no
application downstream of BlackTrax is relying on tracking information while switching between LIVE and
EDIT modes.
Motive 1.10 or lower
LIVE: Information shown in LIVE mode is happening in real-time. Everything shown is what
BTSensors see at the present time. When in LIVE mode, a green image is displayed in Perspective
View.
Note: LIVE mode is the default mode of Motive.
To Next Page
Loading...