Programming Chapters
The Relationship section displays which Fixtures are assigned to which Trackables in the chapter. The
Libraries widget displays Trackable and fixtures that are available.
To add a trackable to a chapter
In the Chapter widget, select a chapter you want to add a Trackable to.1.
In the Libraries widget, click the Trackables tab to view available Trackables.2.
On the Trackables tab, select the Trackable you want to add.3.
Click Add.4.
Result: A Trackable Container of the Trackable appears in the Relationship section for the
chapter.
Note: Trackables can also be added to a chapter by dragging and dropping a Trackable from
the Trackables tab into the top section of the center pane.
For the changes to take effect, click Apply Changes.5.
To delete a trackable from a chapter
In the Chapter widget, select a chapter you want to delete a Trackable from.1.
In the Libraries widget, click the Trackables tab to view available Trackables.2.
On the Trackables tab, select the Trackable you want to delete.3.
Click Delete.4.
Result: The Trackable is removed from the Chapter.
Note: You can also drag and drop the Trackable back into the Library or click the delete
button in the Trackable section.
For the changes to take effect, click Apply Changes.5.
To remove all trackables from a chapter
In the Chapter widget, select a chapter where all Trackables will be removed from.1.
In the center pane, select all Trackables in the Chapter.2.
In the center pane, click Delete.3.
For the changes to take effect, click Apply Changes.4.
To assign a fixture to a trackable
When a Fixture is assigned to a Trackable, the BTSystem will instruct the fixture to follow the Trackable.
Fixtures will only follow an assigned Trackable in the chapter they are assigned, and only when that
chapter is active.
In the Chapter widget, select a chapter that has a Trackable you want to assign a fixture to.1.
In the center pane, select the Trackable bubble of the Trackable.2.
View available fixtures by going to the Libraries widget and clicking the Fixtures tab.3.
On the Fixtures tab, select a fixture you want to assign to the Trackable.4.
Click Assign.5.
Result: A Fixture Box of the fixture appears in the bottom section of the center pane
indicating it is assigned to that Trackable.
Note: Fixtures can also be assigned a Trackable by dragging fixtures from the Fixtures tab
and dropping them onto a Trackable Container.
For the changes to take effect, click Apply Changes.6.
To unassign a fixture from a trackable
To Next Page
Loading...