Creating a BTWYSIWYG Project
Creating a BTWYSIWYG Project from BlackTrax
When a new BlackTrax project is launched from the Portfolio Manager for the first time, a new
BTWYSIWYG project associated with the launched BlackTrax project is automatically created and opens
by default.
When a new BTWYSIWYG project is created from BlackTrax, all necessary settings and configurations are
automatically applied to that new BTWYSIWYG project. These template projects simplify the setup
process for BTWYSIWYG on new installations.
Creating and launching the new BTWYSIWYG project from the BlackTrax Portfolio Manager will
automatically start BTWYSIWYG in a state that is ready for BlackTrax use.
In the Editing section of the System Configuration widget in BlackTrax, you can set the BTWYSIWYG file
to automatically open after the associated BlackTrax file launches from the Portfolio Manager.
See Editing section for more details.
Notes:
We recommend creating and launching the new BTWYSIWYG project from the BlackTrax Portfolio
Manager which is more convenient than having to manually create the new project and settings in
BTWYSIWYG.
The BTWYSIWYG file associated with a BlackTrax project can also be launched via the BTWYG
option under the Modules menu.
Creating a New BTWYSIWYG Project
in BTWYSIWYG
The New command creates a new show document and will be saved as a ".wyg" file.
To create a new BTWYSIWYG project
In BTWYSIWYG, on the Welcome Screen, click File to choose New.1.
Result: The BTWYSIWYG opens a new show file in CAD.
BTWYG Welcome Screen
To Next Page
Loading...