Layout Presets in Motive
Custom preset layouts in Motive were created for BlackTrax and set as preset layouts which can be
restored quickly from the Layout menu or from the Main Toolbar drop-down menu. The custom preset
layouts for BlackTrax are:
Layout Preset Description Keyboard Shortcut
Running Opens the windows that will be used when a BlackTrax project is running. CTRL+1
Aiming Opens the windows that will be used for the aiming of BTSensors. CTRL+2
Calibration Opens the windows that will be used for the configuration of BTSensors. CTRL+3
Configuration Opens the windows that will be used for the configuration of a BlackTrax project. CTRL+4
Recording Opens the windows that will be used for the recording of motion data in a BlackTrax
project.
CTRL+5
The GUI layout in Motive can be customized. All windows can be docked and undocked from the GUI.
Each window can be positioned and organized by drag-and-drop using the on-screen docking indicators.
Windows may float, dock, or stack. Windows form a tabbed window when stacked together. The custom
layouts in Motive can be saved and loaded, allowing for the quick switching between default and custom
configurations suitable for different needs.
Note: Layout configurations from older versions will not load in Motive 2.
To restore a preset layout
In Motive, click the drop-down box at the right-hand side of the main toolbar and click the layout1.
preset from the drop-down menu of layout presets.
Result: Motive opens the preset windows in the selected layout.
Tip: You can also restore a particular layout from the Layout menu.
To Next Page
Loading...