BlackTrax BTSensor - Ferrite Filter

Ferrite Filter
Ferrite Filter Diagram
Product ID
Manufacturer: API
Model number: BF1835
Physical Characteristics
Width: 1.8 cm (0.709”)
Height: 1.96 cm (0.776”)
Depth: 3.48 cm (1.378”)
Center diameter: 0.89 cm (0.354”)
Weight: 15 g (.53 oz)
Operating temperature: 0°C to +40°C (32°F to 104°F)
Impedance: 172 Ohm
Ferrite Function
The ferrite filter is a cylindrical clamp fastened over cables to conform with regulatory standards. A
ferrite filter must be clamped over any cables connected to the TimeKeeper and BTRouter. Ferrite filters
should be fastened on any connected cables as close to the respective device as possible.
BlackTrax Wiki
22 of 298
5/14/2019