Saving the BTWYSIWYG Project
Once you have all the information on the Space that was created in BTWYSIWYG, the information must
be saved as a BTWYSIWYG project file (.wyg). Save will save the open BTWYSIWYG project to the same
file name and location under which it was previously saved. If you are saving the project for the first
time, this command will perform Save As..., which will save the current project with a new file name
and/or a new destination.
To save the BTWYSIWYG project using Save
In BTWYSIWYG, from the File menu, choose Save.1.
Result: The Save as window appears.
In the window, navigate to where you want to save the project file.2.
In the File name field type in the name of the project.3.
Click Save.4.
To save the BTWYSIWYG project using Save As...
In BTWYSIWYG, from the File menu, choose Save As.1.
Result: The Save as window appears.
In the window, navigate to where you want to save the project file.2.
In the File name field type in the name of the project.3.
Click Save.4.
To Next Page
Loading...