Click Open.3.
Result: The .xml file will load all application-related configuration settings into Motive.
Motive 1.10 or lower
New Project will create a new Motive project folder with the new project document (.ttp file) and all its
associated files automatically stored within the specified folder. Specify the name and save the new
Motive project.
Notes:
When a new Motive project is created from BlackTrax, all necessary settings and configurations are
automatically applied to that new project. These template projects can be used to simplify the
setup process for Motive on new installations.
We recommend to creating and launching the new Motive project from the BlackTrax File menu
which is more convenient than having to manually create the new project and settings in Motive.
Save Project will save the open Motive project to the same file name and location under which it was
previously saved. If you are saving the project for the first time, this command will perform as Save
Project As... . Save Project As... is used to save the current project with a new file name and/or a new
destination.
To save a Motive project to a new location and/or using a new file name
In Motive, from the File menu, choose Save Project As....1.
Result: The Save As dialog box will appear.
In the File Name field, type the name of the project.2.
Click Save.3.
To save an existing Motive Project using the same location and file name
In Motive, from the File menu, choose Save Project.
To load a Motive Project
In Motive, from the File menu, choose Open....1.
Result: The Open dialog box will appear.
In the Open dialog box, navigate to where the desired .ttp file is saved. Click on the file to select it.2.
Click Open.3.
Result: The .ttp file will load. Its information and settings will load into Motive.
To Next Page
Loading...