All Widgets option.
From the View menu, choose Close All Widgets.1.
Result: Any widgets currently open, including docked and floating on other monitors, will be
closed.
Note: This will only affect the current view and cannot be undone.
Lower Middle Section
This section contains all global widgets, meaning anything you can open and access across all views. In
this section you will find:
Beacon Patch
BTWYG Patch
Beacons
Messages
System Log
Note: Each widget remembers its location per view only. Meaning if you take Beacon Patch and move it
to a second monitor in Edit view, then switch to Live view, Beacon Patch will reset to its last saved
position in Live view (if no last saved position is available, it will revert to the factory default position).
Bottom Section
This section contains all per-view widgets, meaning each widget is only found in one view and can not be
shared between other views. In this section, per view, you will find:
Live View
Running Books (In Multi Book Projects)
Running Chapters
Modules
Trackable Details
Edit View
Edit Books (In Multi Book Projects)
Edit Chapters
Libraries
Fixture Settings
Trackable Settings
Undo Stack
Terminal
Fixture Calibration Sub-View
Fixture Calibration Control
Fixture Calibration Properties
Fixture Calibration Points
Frame Calibration Sub-View
Frame LEDs
Rigid Frame Construction
To Next Page
Loading...