Click the Clear Fixture Selection button at the bottom of the bottom pane of the central widget to clear
the selected individual fixture or all the selected fixtures.
Several Chapter Configuration
In the Several Chapters tab in the central widget, settings can be applied to several fixtures at once and
across multiple chapters.
To select multiple chapters and have them appear in the widget
In the Edit Chapters widget, select the chapters.1.
At the bottom of the central widget, click the Scan Chapters button.2.
Result: All fixtures in the selected chapters displayed.
in the Fixture Settings widget, change and apply the desired settings.3.
If you select the Auto-Select checkbox, then there is no need to click Make Selection, you can simply
select the fixtures you want to apply settings to and change the settings of each fixture in the Fixture
Settings widget. You may clear the Auto-Select checkbox if you are selecting several fixtures at once
(more than 1000 across all chapters).
Use the Search box to search for fixtures by spot number or fixture type across the selected chapters.
Click the Clear Selection button at the bottom to clear the selected individual fixture or all the selected
fixtures.
To Next Page
Loading...