Click Open.6.
Result: The calibration file loads and a report is displayed showing which fixtures have data
imported.
Note: If no fixtures are selected, all fixture data is imported.
Import Calibration Data
To uncalibrate a fixture
In the Fixtures widget, select the fixtures you want to remove all calibration data from.1.
Click the Clear Selected Data button.2.
Result: All calibration data and measurement points are deleted from the selected fixtures.
To uncalibrate all fixtures in the project
In the Fixtures widget, click Clear All Data.1.
Result: A dialog box appears asking if you really want to clear all calibration data from the
project.
Click Yes.2.
Result: All calibration data are removed from all fixtures in the project.
To Next Page
Loading...