Output Options > Output Modules tab
LED: Unchecked
Centroid: Checked
Orientation: Checked
Timestamp: Checked
Acceleration and Velocity: Unchecked
Motion Control:
Raynok Motion Control Software & System
Edit Output > Advanced tab
Coordinate System: Stage (WYSIWYG)
Integer: Little Endian (Intel Order)
Float Point: Little Endian (Intel Order)
Orientation: Euler
Output Options > Output Modules tab
LED: Checked
Centroid: Checked
Orientation: Checked
Timestamp: Unchecked
Acceleration and Velocity: Unchecked
To Next Page
Loading...