Status: Connected/Disconnected at time of System Status being launched.
Packets: Number of Packets sent at time of the System Status being launched.
Data Sending: Yes/No depending on if packets are increasing.
Note: (Follower only. Displays DMX in Source.)
The System Status widget will also analyze and display the output latency in milliseconds of any Tracking
Adapter outputs running at the time of launching the widget. To accurately determine system latency,
the system needs to be measured over a full minute. Latency does not account for any latency within
Motive, from Stringer to BTSensor, or the network to the Third Party.
Latency will increase slightly with more active Beacons, so when using this tool, ensure all Beacons you
wish to measure are actively tracking before starting the test.
To Next Page
Loading...