of Chapters in the table, and editing and playback from the Cue Module are disabled. Click
Enable Auto-Scroll to enable automatic scrolling through the Chapter list.
Load List: Click this button to load the list of saved Chapter(s) that were created and stored as a
BlackTrax Cue File (.bcf) file.
Save List: Click this button to save the list of Chapter(s) that were created in this module and
added to the list in the table. This saves a .bcf file.
Note: A .bcf file only contains references to the Chapter's .rec files. It does not contain the
.rec themselves. Ensure .rec files are still at the same path when loading .bcf files back into
Cue.
Play: Click this button to playback a selected Chapter from the table. Click the Stop button that
appears to stop the playback.
Delete Chapter: Click this button to remove the selected Chapter(s) from the table.
Create Chapter: Click this button to create a Chapter that consists of the file that has been
accessed and displayed in the Chapter Content section.
Table of Chapters
The table section displays the list of Chapters that have been created, showing in columns the Chapter
number, Name, File, Loop, Delay, Information, and Status.
Log
In the Log section, information on data that passes through the Cue module and system events are
displayed. This information can also be saved to a separate file for review later. Log files can be found at
C:\bt_run_time.
Enable Logging: Select this checkbox to display playback information.
To File: Select this checkbox to enable saving the log of data information into a file in the
bt_run_time folder.
Clear: Click this button to clear all the displayed log data.
Chapter Command
Received: Displays the number of Chapter changes received from the Main GUI.
To Next Page
Loading...