File (.bcf).
Click Load List to load the list of saved Chapters that was created and stored as a BlackTrax
Cue File (.bcf).
Click Create Chapter to add a Chapter that consists of the file that has been accessed in the
Chapter Content section.
Click Delete Chapter to remove the selected Chapter from the cue stack list.
Click Play to playback a selected Chapter from the cue stack list.
Click Recording Mode to toggle into Show Mode.7.
Result: The table will display the cue stack of Chapters in the table which will be played back
from the BlackTrax GUI. For example, when the Main GUI enters Chapter 1, Cue will also start
playing back the recorded file in Chapter 1 as well. When the Main GUI enters the Standby
Chapter or a Chapter that is not present in Cue, Cue will stop all playback. Editing and
playback from the Cue Module are disabled.
To Next Page
Loading...