8.1ms (8100 µs) at 120 FPS
5.3 ms (5300 µs) at 180 FPS
Input/Output & Power
Data: GigE (1000BASE-T)
Synchronization: Ethernet
Power: PoE or PoE+¹
Attention:
The switch must provide consistent power to every port simultaneously in order to power each
sensor.
Standard PoE switches must provide a full 15.4 watts to every port simultaneously.
Note that PoE Midspan devices or power injectors are not suitable for Ethernet camera systems.
To Next Page
Loading...