From the Tools menu, choose Quick Tools and then choose Quick Motion Patch Tool.1.
Under the Clear Motion Patch section, ensure that All Trackable/Axes is selected.2.
Click Clear.3.
Result: All Trackables are unpatched from the motion universe. The total number of patched
Trackables removed will be reported at the bottom of the window.
Click Close.4.
To clear only selected trackables' patch using the quick motion patch tool
Select all trackables you wish to clear patch info for in one of the Wireframe views.1.
Tip: Remember that the Trackable is the Cartesian axis associated with the Trackable, not
the Trackable object itself.
From the Tools menu, choose Quick Tools and then choose Quick Motion Patch Tool.2.
Under the Clear Motion Patch section, ensure that Only Selected Trackable/Axes is selected.3.
Click Clear.4.
Result: All selected Trackables are unpatched from the motion universe. The total number of
patched Trackables cleared will be reported at the bottom of the window.
Click Close.5.
To Next Page
Loading...