Technical / Programming Manual
FT128 Rev 2.2
86
32. General Interlocking Input Activated
33. Consecutive Interlocking Input Activated (sequence) (+start Area no. and
point +stop Area no. and point +Quantity)
10.5.1.3 Disablement
34. Fire Brigade Tx Disabled
35. Zone Disabled (+Zone no.)
36. Zone Address Disabled (+Zone no. +Address)
37. General Zone Address Disabled
38. All Control Disabled
39. All Alarm Devices Disabled
40. Control Disabled Control Unit (+Control Unit)
41. Alarm Device Disabled Control Unit (+Control Unit)
42. General Disablement
10.5.1.4 Other
43. Indication Fire Brigade TX Activated
44. Indication Fault TX Activated
45. General Fault
46. General Mains Fault
47. Reset Pulse Zone Address (+Zone no. +Address)
48. Time Channel Activated (+Time channel name / no.)
49. Alert Annunciation Activated
50. Alert Annunciation Acknowledged
51. Door Open
52. Fire Door Closing (+Zone no. +Address)
53. General Service Signal
54. Fire brigade TX
55. Door Open Control Unit (+Control Unit)
56. Extinguishing System Fault
57. Extinguishing System Released
58. Activated Key Cabinet
59. Fault Control Unit (+Control Unit)
60. Consecutive Fault Control Unit (+start Control Unit and stop Control Unit)
61. Zone Fault (+Zone no.)
62. External Fault (+ext. fault)
63. Technical Warning (+techn. warning)
64. General Technical Warning
To Next Page
Loading...