Technical / Programming Manual
FT128 Rev 2.2
154
User level Information only gives access to the menus H4, H6
H9 and H10. (Level 2A)
User level Building officer gives access to the menus H1 – H4, H6, H7, H9 and H10.
(Level 2B).
User level Service personnel gives access to the menus H1 - H10. (Level 3A).
For more information regarding user names, passwords, user levels, logon to a control unit,
etc. see FT128 Operation Manual.
19.4 The Tools menu
The EBLWin menu "Tools" is used when the PC is to be connected to FT128 for download
/ backup etc.
Figure 56 EBLWin menu "Tools".
Some commands are disabled (grey) since they require the PC / EBLWin to be connected
and logged on to FT128.
The faults cannot be acknowledged on this level.