CF MOTO ZForce 950EX - Oil Pump Assy; Oil Pump Gear and Oil Pump Idle Gear; Starter Dual Gear

CFMOTO
05-112
Assembly
Install magneto stator
1
.
Install bolts
2
.
Settle wires and install press plate
3
.
Install bolts
4
.
5.5.17 Starter Dual Gear
Inspect starter dual gear
1
for wear or
damage. Replace if necessary.
Inspect breather shaft
2
for wear or
damage. Replace if necessary.
Inspect middle gear
3
for wear or damage.
Replace if necessary.
5.5.18 Oil Pump Gear and Oil Pump Idle
Gear
Inspect oil pump idle gear
1
teeth and
surface for cracks or damage. Replace if
necessary.
Inspect oil pump gear
2
teeth and
surface for cracks or damage. Replace if
necessary.
5.5.19 Oil Pump Assy
Inspect oil pump cover
1
, shaft
2
, inner
rotor
3
, roller needle
4
, outer rotor
5
.
Replace if any defect occurs.
4
1
3
2
1
2
1
2
2
3
1
2
3
5
4
056801
056802
056803
056804
© CFMOTO Powersports, Inc. This manual is subject to all applicable copyright laws.
Reproduction or duplication in any form, whole or in part, is strictly prohbited.