02-24
CFMOTO
2.6 Grease and Sealant
Location Precautions Type
Steering bearing
Brake pedal moving point
Suspension moving point
Steering column inner face
Seat lock moving point
Multifunction lithium grease
Cable, bearing and other moving parts lubrication
Location Item Type
Rear wheel hub
Lubrication Lithium grease for auto GB/T5671Shock absorber knuckle bearing
Parking cable connecting point
2.7 Service Products
Engine service materials include engine oil, transmission oil, grease, coolant, at sealing
glue, cylinder locking glue and ect.
Name Specication Use position Remark
Oil
SAE 10W-40
SAE 5W-40
SAE 15W-40
API level: SJ or higher
(See page 02-06)
Cylinder inner moving parts.
Crankcase, CVT case inner
moving parts.
Cylinder head moving parts.
Check lubrication system for
more details
Capacity:
2500mL(engine oil &
lter replacement)
2600mL(Engine
overhaul)
Transmission
oil
75W/90 GL-5 Gear case Capacity: 600mL
Lubrication oil
Piston pin, Valve rod, Valve
oil seal, Camshaft
Grease 3# MoS
2
lithium grease
Oil seal lip, O-ring and other
sealing material surface and
sealed bearing.
Coolant
-35°C anti-corrosion,
anti-freeze, high boiling
point coolant
Cooling system, water seal
installation
Capacity:
Approximately 4.5L
(4.8 qt)
Flat surface
sealant
Magneto stator wire rubber
sleeve and left crankcase
cover. Crankcase and
cylinder body. Water seal
and water pump and washer.
Blue
Thread locker
Screws
648 Cylinder
sealant
Oil seal and crankcase
surface
© CFMOTO Powersports, Inc. This manual is subject to all applicable copyright laws.
Reproduction or duplication in any form, whole or in part, is strictly prohbited.
To Next Page