06 Body Covering Parts
06-3
6.2.4 Seat Middle RH Protection Plate
Removal
Remove ve expansion screws.
Remove seat middle RH protection plate
1
.
Middle LH protection plate follows the
same removal procedures.
Installation
Reverse the removal procedures for
installation.
6.2.5 Middle Protection Cover
Removal
Remove two screws
1
.
Remove rear ventilation plate connecting
plate
2
.
Remove six self-tapping screws
3
.
Loosen gearshift lever nut
4
.
Remove gearshift lever knob
5
.
Remove middle protection cover assy
6
.
Installation
Reverse the removal procedures for
installation.
1
1
2
4
5
3
3
060301
060302
060303
6
060304
© CFMOTO Powersports, Inc. This manual is subject to all applicable copyright laws.
Reproduction or duplication in any form, whole or in part, is strictly prohbited.
To Next Page