CF MOTO ZForce 950EX - 9.4 Front Swing Arm

CFMOTO
09-8
Adjust the shock absorber according to the
load.
“S” direction is to increase the resistance.
“F” direction is to decrease the resistance.
Shock Absorber Specication:
Rebound resistance
3
(adjustable): 19±3
gear
Delivery state: 12th gear
Compression resistance (A): 18±2 gear
Delivery state: 13th gear
Compression resistance (B): 18±2 gear
Delivery state: 13th gear
Adjustment: Compression resistance is
divided into A and B. Adjust A first during
usage. If A is at the maximum gear, then it
is allowed to adjust B.
Installation
Reverse the removal procedures for
installation.
9.4 Front Swing Arm
Removal
Remove three pins
1
.
Remove three M12 slotted ange nuts
2
.
Remove steering rod
3
.
Remove upper swing arm
4
.
Remove lower swing arm
5
.
Remove steering knuckle
6
.
A
090802
B
3
090801
1
2
3
5
6
4
090803
090804
© CFMOTO Powersports, Inc. This manual is subject to all applicable copyright laws.
Reproduction or duplication in any form, whole or in part, is strictly prohbited.