05-141
05 Engine
5.6.3 Crankshaft Connecting Rod Assy
Apply some engine oil on MAG crankcase
plain bearings and crankshaft journal.
Install crankshaft connecting rod assy
1
.
NOTE: The connecting rod, which
is closed to MAG crankcase, should
be set into second cylinder. Rotate
crankshaft a little bit to install it in
place. The crankshaft should rotate
freely without stuck feeling.
Crankcase Assembly
Put Crankshaft Plain Bearing Protecting
Sleeve
4
on crankshaft and Gearshift
Main Shaft Oil Seal Protecting Sleeve
5
on main shaft.
Install roller needle
1
.
Install dowel pins
2
.
Install PTO crankcase
3
.
Install bolts
1
.
Install bolts
2
.
Install bolts
1
.
Install bolts
2
.
1
3
2
1
2
4
5
2
2
2
1
1
2
2
2
1
1
2
1
059701
059702
059703
059704
© CFMOTO Powersports, Inc. This manual is subject to all applicable copyright laws.
Reproduction or duplication in any form, whole or in part, is strictly prohbited.
To Next Page