CF MOTO ZForce 950EX - 2.3 Main Specifications

02-13
02 Specications/Vehicle Data
2.3 Main Specications
Vehicle Specication
Model CF1000US CF1000US-A CF1000UTR-B
Size: length×width×height 3020×1650×1850 2990×1565×1820 3135×1820×1820
Wheelbase 2285mm
Min. ground clearance 340mm 310mm 310mm
Dry weight 685kg 680kg 690kg
Passengers 2 person (includes driver)
Rear cargo box maximun load 100kg
Max. vehicle load allowed 290kg
Recommended Towing Capacities:
Towing Hitch Weight
Trailer and Cargo Weight
40kg (bolt type) / 25kg (plug pin type)
400kg (bolt type) / 250kg (plug pin type)
Frame type Steel tube
Engine Specication
Model 2V91Y
Type
V-twin, liquid-cooled, 4-stroke,
8 valves, SOHC chain drive
Bore×Stroke 91mm×74mm
Displacement 962.6cc
Compression ratio 10.6:1
Min. no-load stabilized speed (idling) 1300r/min±130r/min
Physical size: Length×Width×Height 679mm×556mm×589mm
Net weight 79kg
Output style Front and rear shaft
Engine output rotating direction Clockwise (rear view)
Electrical
system
Ignition method ECU / Coil
Spark plug DCPR8E (NGK)
Magneto VAC 3-phase
Starting method Electric start
EFI system
ECU Bosch
Injectors Bosch
Idle speed 1300r/min ± 130r/min
Lubrication
system
Lubrication method Pressure + splash
Oil pump Rotor motor
Filter style Full ow cartridge lter
Engine oil
SAE 10W-40 SJ
SAE 5W-40 SJ
SAE 15W-40 SJ
or higher API
Transmission oil SAE 75W/90 GL-5
Cooling
system
Cooling type Closed-circuit coolant radiator
Coolant -35°C Anti-freeze mix
Oil cooling Integrated heat transfer cooler
Throttle Valve diameter 57 mm
Air Filter Paper cartridge lter
© CFMOTO Powersports, Inc. This manual is subject to all applicable copyright laws.
Reproduction or duplication in any form, whole or in part, is strictly prohbited.