02-23
02 Specications/Vehicle Data
Lock nut M65×1.5, bearing 1 M65×1.5 110 Apply thread locker
Bolt M8×28 (Driven bevel bearing
seat)
4 M8×28 25
Screw T25 (shift drum) 1 M5×8 6
Spring seat, shifting limit 1 M12×1 20
Bolt M5×16 (Oil pump) 3 M5×16 7 Apply thread locker
Screw M8×20 (Overriding clutch) 6 M8×20 30 Apply thread locker
Bolt M6×30
(No EPS Magneto stator)
3 M6×30 16
Optional: Apply
thread locker
Bolt M6×35
(EPS magneto stator)
3 M6×35 16
Optional: Apply
thread locker
Bolt kit, cylinder head cover 8 M6 7
Bolt M6×45
(First cylinder thermostat cover)
2 M6×45 6
Bolt M6×25
(Tensioner and second thermostat
cover)
6 M6×25 6
Coolant temperature sensor 1 M12×1.5 16
Oil pressure switch 1 M10×1 12
Lock bolt, oil cooler 4 M6×18 10
Lock bolt, oil cooler seat 2 M10×20 25
Retainer, front middle output bearing 1 M55×1.5 80
Apply thread locker
Left-hand thread
Torque Table - Non-specic Fasteners
Type Torque N•m Type Torque N•m
M5 bolt, nut 5 M5 screw 4
M6 bolt, nut 10 M6 screw 9
M8 bolt, nut 20~30 M6 SH ange bolt 10
M10 bolt, nut 30~40 M6 ange bolt and nut 12
M12 bolt, nut 40~50 M8 ange bolt and nut 20~30
M10 ange bolt and nut 30~40
© CFMOTO Powersports, Inc. This manual is subject to all applicable copyright laws.
Reproduction or duplication in any form, whole or in part, is strictly prohbited.
To Next Page