Index
IN-24
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-25303-03
IPv6 1-3
IRDP 1-13
Layer 3 interfaces 1-5
MAC address and IP address 1-10
passive interfaces 1-103
protocols
distance-vector
1-3
dynamic 1-3
link-state 1-3
proxy ARP 1-10
redistribution 1-96
reverse address resolution 1-10
routed ports 1-5
static routing 1-3
steps to configure 1-5
subnet mask 1-7
subnet zero 1-8
supernet 1-8
UDP 1-16
unicast reverse path forwarding 1-17, 1-91
with SVIs 1-5
See also BGP
See also EIGRP
See also OSPF
See also RIP
IPv4 ACLs
applying to interfaces
1-21
extended, creating 1-11
named 1-16
standard, creating 1-10
IPv6
ACLs
displaying
1-8
limitations 1-3
matching criteria 1-3
port 1-2
precedence 1-2
router 1-2
supported 1-2
addresses 1-2
address formats 1-2
and switch stacks 1-15
applications 1-9
assigning address 1-17
autoconfiguration 1-9
CEFv6 1-30
default configuration 1-16
default router preference (DRP) 1-9
defined 1-1
Enhanced Interior Gateway Routing Protocol (EIGRP)
IPv6
1-12
EIGRP IPv6 Commands 1-13
Router ID 1-12
feature limitations 1-14
features not supported 1-14
forwarding 1-17
ICMP 1-4
monitoring 1-39
neighbor discovery 1-4
OSPF 1-11
path MTU discovery 1-4
SDM templates 1-3, 1-1
stack master functions 1-15
Stateless Autoconfiguration 1-9
supported features 1-3
switch limitations 1-14
understanding static routes 1-11
IPv6 traffic, filtering 1-4
IRDP
configuring
1-14
definition 1-13
support for 1-17
IS-IS
addresses
1-67
area routing 1-67
default configuration 1-68
monitoring 1-76
show commands 1-76
To Next Page
Loading...
