D-Link xStack DGS-3620 Series - Page 1002

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
997
Port Security Log State : Disabled
System Maximum Address : No Limit
VLAN Configuration (Only VLANs with limitation are displayed)
VID VLAN Name Max. Learning Addr.
---- -------------------------------- ------------------
1 default 64
2 TstVLAN 8
DGS-3620-28PC:admin#
To display the port security information of switch ports 1 to 6:
DGS-3620-28PC:admin#show port_security ports 1-6
Command: show port_security ports 1:1-1:6
Port State Lock Address Mode Max. Learning Addr. Action
----- -------- ----------------- ------------------- --------
1:1 Disabled DeleteOnReset 32 Drop
16 VID: 1
1:2 Disabled DeleteOnReset 32 Drop
1:3 Disabled DeleteOnReset 32 Drop
1:4 Disabled DeleteOnReset 32 Drop
1:5 Disabled DeleteOnReset 32 Drop
1:6 Enabled Permanent 10 Drop
DGS-3620-28PC:admin#
85-8 config port_security log state
Description
This command is used to enable or disable the port security log.
Format
config port_security log state [enable | disable]
Parameters
enable - Specifies to enable the port security log.
disable - Specifies to disable the port security log.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the port security log: