D-Link xStack DGS-3620 Series - Show Syslog

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
861
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To disable syslog sending a message:
DGS-3620-28PC:admin#disable syslog
Command: disable syslog
Success
DGS-3620-28PC:admin#
75-15 show syslog
Description
This command is used to display the syslog protocol global state.
Format
show syslog
Parameters
None.
Restrictions
None.
Example
To display the syslog protocol global state:
DGS-3620-28PC:admin#show syslog
Command: show syslog
Syslog Global State: Enabled
DGS-3620-28PC:admin#