D-Link xStack DGS-3620 Series - Chapter 95 Ripng Commands

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1078
Chapter 95 RIPng Commands
enable ripng
disable ripng
show ripng {ipif <ipif_name 12>}
config ripng {method [no_horizon | split_horizon | poison_reverse] | update <sec 5-65535> |
expire <sec 1-65535> | garbage_collection <sec 1-65535>} (1)
config ripng ipif [<ipif_name 12> | all] {state [enable | disable] | metric <value 1-15>} (1)
95-1 enable ripng
Description
This command is used to enable RIPng globally for the Switch.
Format
enable ripng
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command. (EI Mode Only
Command)
Example
To enable RIPng globally:
DGS-3620-28PC:admin# enable ripng
Command: enable ripng
Success.
DGS-3620-28PC:admin#
95-2 disable ripng
Description
This command is used to disable RIPng globally for the Switch.
Format
disable ripng