D-Link xStack DGS-3620 Series - Debug Show Status

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
360
DGS-3620-28PC:admin# debug routefilter show route_map
Command: debug routefilter show route_map
route-map 123,r_id:1
Sequence 1, type:1
Match clauses:
as-path (as-path filter): list1
community list1 exact
ip next-hop prefix-list 123
ip address prefix-list 123
metric 4294967294
ipv6 address prefix-list abc
ipv6 next-hop prefix-list abc
Set clauses:
Sequence 10, type:0
Match clauses:
Set clauses:
Sequence 100, type:1
Match clauses:
Set clauses:
Sequence 500, type:0
Match clauses:
Set clauses:
Sequence 1000, type:0
Match clauses:
Set clauses:
Sequence 5000, type:1
Match clauses:
Set clauses:
Sequence 10000, type:1
Match clauses:
Set clauses:
Sequence 65535, type:0
Match clauses:
Set clauses:
route-map ~!@#$%^&*()_+~!@,r_id:2
Sequence 10, type:0
Match clauses:
Set clauses:
Sequence 65535, type:0
Match clauses:
metric 4294967294
ipv6 next-hop 1::1
ipv6 address abc0
Set clauses:
DGS-3620-28PC:admin#
20-76 debug show status
Description
Show the debug handler state and the specified module’s debug status.