D-Link xStack DGS-3620 Series - Chapter 64 MAC Notification Commands

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
753
Chapter 64 MAC Notification
Commands
enable mac_notification
disable mac_notification
config mac_notification {interval <sec 1-2147483647> | historysize <int 1-500>}(1)
config mac_notification ports [<portlist> | all] [enable | disable]
show mac_notification
show mac_notification ports {<portlist>}
64-1 enable mac_notification
Description
This command is used to enable the trap notification for newly learned and cleared MAC
addresses on the Switch.
Format
enable mac_notification
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To enable the MAC notification function:
DGS-3620-28PC:admin#enable mac_notification
Command: enable mac_notification
Success.
DGS-3620-28PC:admin#
64-2 disable mac_notification
Description
This command is used to disable the trap notification for newly learned and cleared MAC
addresses on the Switch.