D-Link xStack DGS-3620 Series - Show Authentication Ports

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
293
Parameters
None.
Restrictions
None.
Example
To display the authentication MAC format setting:
DGS-3620-28PC:admin#show authentication mac_format
Command: show authentication mac_format
Case : Uppercase
Delimiter : None
Delimiter Number : 5
DGS-3620-28PC:admin#
19-9 show authentication ports
Description
This command is used to display the authentication method and authorization mode on ports.
Format
show authentication ports {<portlist>}
Parameters
<portlist> - (Optional) Specifies to display compound authentication on specific port(s).
Restrictions
None.
Example
To display the authentication settings for ports 1 to 3: