D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
151
Example
This example shows how to display the force aging address in the ARP table.
DGS-3620-28PC:admin#show arpentry force_aging_addr
Command: show arpentry force_aging_addr
ARP Force Aging Address:
Interface IP Address MAC Address Type
------------- --------------- ----------------- ---------------
------------ 10.48.74.12 ----------------- ------
Total Entries: 1
DGS-3620-28PC:admin#
7-7 clear arptable
Description
This command is used to remove dynamic entries from the ARP table. Static ARP entries are not
affected.
Format
clear arptable
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To remove the dynamic entries from the ARP table:
DGS-3620-28PC:admin#clear arptable
Command: clear arptable
Success.
DGS-3620-28PC:admin#
7-8 show ipfdb
Description
This command is used to display the IP address forwarding table on the Switch.

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English