D-Link xStack DGS-3620 Series - Config Terminal Width

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
28
UserName:
2-25 clear
Description
This command is used to clear the terminal screen.
Format
clear
Parameters
None.
Restrictions
None.
Example
To clear the terminal screan:
DGS-3620-28PC:admin#clear
Command: clear
2-26 config terminal width
Description
This command is used to configure the terminal width.
Format
config terminal width [default | <value 80-200>]
Parameters
default - Specifies the default terminal width value.
<value 80-200> - Enter a terminal width value between 80 and 200 characters. The default value
is 80.
Restrictions
None.
Example
To configure the terminal width: