D-Link xStack DGS-3620 Series - Disable Web

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
23
Example
To enable HTTP and configure port number:
DGS-3620-28PC:admin#enable web 80
Command: enable web 80
Note: SSL will be disabled if web is enabled.
Success.
DGS-3620-28PC:admin#
2-19 disable web
Description
This command is used to disable Web UI.
Format
disable web
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To disable HTTP:
DGS-3620-28PC:admin#disable web
Command: disable web
Success.
DGS-3620-28PC:admin#
2-20 save
Description
This command is used to save the current configuration or log in non-volatile RAM.
Format
save {[config <pathname> | log | all]}