D-Link xStack DGS-3620 Series - Enable Sntp

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1216
Restrictions
None.
Example
To show SNTP:
DGS-3620-28PC:admin#show sntp
Command: show sntp
Current Time Scource : System Clock
SNTP Status : Disabled
IPv4 Primary SNTP Server : None
IPv4 Secondary SNTP Server: None
IPv6 Primary SNTP Server : None
IPv6 Secondary SNTP Server: None
SNTP Poll Interval : 720 sec
DGS-3620-28PC:admin#
115-4 enable sntp
Description
This command is used to turn on SNTP support.
Format
enable sntp
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable SNTP:
DGS-3620-28PC:admin#enable sntp
Command: enable sntp
Success.
DGS-3620-28PC:admin#