D-Link xStack DGS-3620 Series - Enable Cfm; Disable Cfm

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
242
Success.
DGS-3620-28PC:admin#
15-10 enable cfm
Description
This command is used to enable the CFM globally.
Format
enable cfm
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command. (EI Mode Only
Command)
Example
To enable the CFM globally:
DGS-3620-28PC:admin#enable cfm
Command: enable cfm
Success.
DGS-3620-28PC:admin#
15-11 disable cfm
Description
This command is used to disable the CFM globally.
Format
disable cfm
Parameters
None.