D-Link xStack DGS-3620 Series - Enable Syslog; Disable Syslog

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
860
Restrictions
Only Administrators and Operators can issue this command..
Example
To configure method to save log as on demand:
DGS-3620-28PC:admin# config log_save_timing on_demand
Command: config log_save_timing on_demand
Success.
DGS-3620-28PC:admin#
75-13 enable syslog
Description
This command is used to globally enable syslog to send log messages to a remote server.
Format
enable syslog
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To enable syslog to send a message:
DGS-3620-28PC:admin#enable syslog
Command: enable syslog
Success
DGS-3620-28PC:admin#
75-14 disable syslog
Description
This command is used to disable syslog from sending a message.
Format
disable syslog