D-Link xStack DGS-3620 Series - Show Wac Ports

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1313
Parameters
None.
Restrictions
None.
Example
To show WAC:
DGS-3620-28PC:admin# show wac
Command: show wac
Web-based Access Control
-----------------------------------
State : Enabled
Method : RADIUS
Redirect Path : http://www.dlink.com
Virtual IP : 0.0.0.0
Virtual IPv6 : 2000::20
Switch HTTP Port : 80 (HTTP)
RADIUS Authorization : Enabled
Local Authorization : Enabled
Trap State : Enabled
DGS-3620-28PC:admin#
125-14 show wac ports
Description
This command is used to display WAC port information.
Format
show wac ports {<portlist>}
Parameters
<portlist> - (Optional) Specifies a range of member ports to display the status.
Restrictions
None.
Example
To display WAC ports 1 to 3: