D-Link xStack DGS-3620 Series - Disable Snmp Traps

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
839
DGS-3620-28PC:admin#enable snmp traps
Command: enable snmp traps
Success.
DGS-3620-28PC:admin#
74-12 disable snmp traps
Description
This command is used to disable SNMP trap support on the switch.
Format
disable snmp traps
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To prevent SNMP traps from being sent from the switch:
DGS-3620-28PC:admin#disable snmp traps
Command: disable snmp traps
Success.
DGS-3620-28PC:admin#
74-13 enable snmp authenticate_traps
Description
This command is used to enable SNMP authentication failure trap support.
Format
enable snmp authenticate_traps
Parameters
None.